Put here an image with your slogan

You are here: Home
Ball Swappers Kit for Rapid Hitch PDF Print E-mail
Written by MatthewH   
Saturday, 27 March 2010 10:21

We are proud to announce the addition of a Rapid Hitch Conversion set to our Ball Swappers lineup. Here are the advantages of upgrading to a Ball Swappers set.

andrhbs1.jpg - 492.71 Kbandrhbs2.jpg - 532.01 Kbandrhbs3.jpg - 478.94 Kb

  1.  Higher weight ratings our 2" is rated at 10,000 not 8,000.
  2.  Lifetime Warranty on the trailer balls, if your past your original warranty now you can be covered.
  3. Stainless Steel
  4. 3 ball set, you can be prepared for any situation and change the balls tool free.
  5. You gain almost 3" of ground clearance. Our post only protrudes from 1 side so if you need to use your rapid hitch in the lowest setting and have ever drug it on the ground, this will be a thing of the past. It is extremely useful on the 10" drop models.
  6. Storage pouch for the trailer balls when not in use.

This conversion is very simple to do.

  1. Remove the ball holder from the hitch.
  2. Look on the inside of the ball holder for the pin with threads in the center.
  3. Use a 1/4" bolt and thread into the pin.
  4. Pull on bolt to remove pin.
  5. Once pin is completely removed slide the trailer balls out of the ball holder, either direction.
  6. Take Ball Swappers shank from package and place in ball holder, please note to locate the ball recieving hole to the rear of the hitch(towards the trailer), if you install backwards it will make switching the Ball Swappers balls more difficult.
  7. Replace pin with bolt attached, make sure to get pin seated all the way down in the hole or you wont be able to mount the ball holder back onto the hitch.
  8. Unthread the 1/4" bolt attached to the pin.
  9. Replace the ball holder on the hitch.
  10. Choose the size of Ball Swappers ball you need and thread it on to the Ball Swappers post.
  11. Hook up to your trailer and go.

If you have trouble removing you pin that holds the trailer balls in the ball holder, or would prefer that we install for you. Just remove the ball holder from the hitch and pack it in a usps medium flat rate box. Pack the ball holder well and take up extra space with newspaper or other packing material so there is no movement inside the box and send it to us at

Premier Trailer Towing Products

P.O. Box 810

Albert Lea, MN 56007

There is no charge for us to install, just the postage to get it to us.

These are so new that they are not in our webstore yet so if you would like to purchase one give us a call at 507-402-5499 to order.

The price is $234.99 and shipping is $7.00 anywhere in the U.S.

Last Updated on Saturday, 27 March 2010 11:08

Upcoming Events

There are no upcoming events currently scheduled.
View full calendar
January 2022 February 2022 March 2022
Su Mo Tu We Th Fr Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28